Cloning an existing print mode may be adequate if you are not able to create a new Media Profile, or a customer requests a media you do not normally use.

1. Select Clone an existing Print Mode from the Create Profiles screen (Figure 1).This opens the Clone an existing Print Mode dialog (Figure 2).
2. Determine the Media Group of the profile you would like to clone. Use the drop-down boxes and check boxes to make your selections.
3. Select your Test Image and then set the Test Image options. If you'd like to use a Test image other than the default image, click Other and browse for your image.
4. Preview your image and set your media roll size.
5. Click Print to print your test image.  

TIP: When testing multiple media for a clone candidate, RIP-Queue will ask that the media type be changed before each print. Changing Media Manager to Print Direct (File > Application Settings) will bypass RIP-Queue and avoid having to change the Media Type in RIP-Queue. This will not work with mixed print resolutions, or on printers that require a media match on the printers front panel.